BAD-MAB.com

1956-61 Beetle LED Conversion Kit

Stop light visibility was never a strong point for the classic Beetle. Now, Beetle owners can upgrade their stop, turn, and taillights to the latest in LED lighting technology. The all new Technostalgia LED retro-fit kit snaps into a stock 1956-61 VW Beetle taillight housing and converts all rear lighting functions to bright and visible LED lights. The installation takes about 30 minutes and requires no electrical knowledge.

Of course, the classic snowflake design was maintained in the all new acrylic lens. The lens is manufactured from new tooling and is designed to enhance the LED light. Stock appearance is maintained when the lights are off.

The LED retro-fit kit ships assembled and ready to install. The kit includes the LED array, a molded acrylic lens, lens-to-taillight housing gasket, 24 inch wiring pigtail, stainless base and hardware, and installation instructions. 12 volt, negative ground only. More Pics/Video

(Option 1) Includes free freight to our United States customers who are putting the lights on the original car (56-61) and do not have a dedicated turn signal.
(Option 2) Includes International freight for customers outside the US who are putting the lights on the original car (56-61) and do not have a dedicated turn signal.
(Option 3) Includes an add-on kit with a dedicated turn signal wire for customers who are putting the lights on a later model (example: 62-67).

1962-67 LED Conversion Kit

At the heart of the new kit is the Technostalgia manufactured LED array that incorporates fourteen, automotive grade LEDs. This guarantees ultra bright performance, a wide dispersion angle, and maximum visibility of the tail light, stop light, and turn signals. The LED array is expected to last for the life of the vehicle and draws very little electrical current. The LED also features Technostalgia’s RapidFire brake lights. With RapidFire, the brake lights are pulsed rapidly three times within the first half second of pressing the brake pedal followed by constant ON. This cycle is repeated every time the brake pedal is pressed. The kit is backed by Technostalgia’s lifetime warranty.

The LED retro-fit kit ships assembled and ready to install. The kit includes the LED array, wiring pigtail with insulated connectors, stainless steel brackets, and installation instructions.

1962-71 VW Bus LED Conversion Kit

The all new Technostalgia LED retro-fit kit bolts into the USA version (all red lens) 1962-71 VW Bus taillight housing and converts all rear lighting functions to bright and visible LED lights. The installation takes about 30 minutes and requires no electrical knowledge. Since the original lenses are re-used, a stock appearance is maintained while the lights are off.

The LED retro-fit kit ships assembled and ready to install. The kit includes the LED array, wiring pigtail with insulated connectors, stainless steel brackets, and installation instructions.

1938-39 Lincoln Zephyr

The ultra-rare 1938-39 Lincoln Zephyr taillight has been completely re-designed and re-tooled. This exciting product improves on all aspects of the original taillight while remaining dimensionally identical.

The LED unit uses twenty-one, automotive grade LEDs, which guarantees ultra bright performance, a wide dispersion angle, and maximum visibility of the tail, stop, and turn light. The LED array is expected to last 100,000 hours of operation and draws very little electrical current. The LED also features RapidFire brake lights. With RapidFire, the brake lights are pulsed rapidly three times within the first ½ second of pressing the brake pedal followed by constant ON. This cycle is repeated every time the brake pedal is pressed.

The taillight is designed to surface mount on a car and has no conventional bucket. This means that the only holes required are two small holes for the stainless steel mounting studs and another hole for the wiring. The studs are spaced the same as a 39 Ford taillight for those who have 39 Ford taillights and want to upgrade to the larger Lincoln light without drilling any new holes.

1938-39 Ford

The 1938-39 Ford teardrop kit is designed to maintain the classic hot rod look of yesterday while creating a safer, more reliable tail light.

Several features of the 39s include: a 14 light, high intensity LED array designed for improved day and night visibility, an acrylic lens with built in reflector for lights off safety, pressure cast and chrome plated bezel, custom molded tail light to body gasket, all stainless steel hardware and backing plate, and a surface Mount design for increased utilization.

39 Signature Series